eBayStores
  • eBay Deals
  • Shop gifts
Bread Crumb Link
 Paul's Slot Car Shop

Paul's Slot Car Shop

 Maintained by:
 .... solutions for your slot car tire needs (and now Mini/Micro R/C). Handmade Urethane Slot Car Racing Tires, 1/32 and 1/24 scales, superior traction on all track surfaces. Plastic, wood, and MDF...easy to sand, no cleaning or traction compounds needed, extreme elasticity and strength.

Store search

Store categories

Store home
Show all subcategories

Store pages

  • Tire Selection Info
Store Newsletter!
Add my Store to your Favourites and receive my email newsletters about new items and special promotions!
General Interest
  

Tire Size Selection… 1/32 Scale

Trying to decide which tire is right for your slot car? Urethane tires fit practically everything! Slot car tires made from urethane possess incredible stretching properties, and as such fewer tire sizes need to be produced. A urethane tire with a 13mm hub opening will stretch over a 20mm hub and still have over 80% of it's original side wall height. Often it fits tight enough that it needs no gluing. The single most important dimension is the width of the raised rib in the center of the hub. The 4 most common rib widths are 2mm, 5mm, 6mm, and 7mm. Listed below are most common tires that will fit the majority of applications as I will describe them in auctions. Sizes will be described by TIRE DIAMETER x TREAD WIDTH x CENTER RIB in mm's.

20x9x2mm   fits Scalextric F1, Nascars, and COT, Carrera Nascars…. 2mm rib

20x11x2mm fits Scalextric F1 & Nascars, and COT,Carrera Nascars…. 2mm rib

20x12x2mm fits Scalextric F1, and COT (I make 4 tread widths to fit 2mm ribbed hubs, 9, 11, 12, and 13 mm.)

20x12x3mm fits Historic Scale Racing Replicas McLaren M8d. 

20x12x4mm fits Scalex Jaguar XKRS, Viper, F430, all Scalex GT, LMP Carrera Nascar C.O.T. (sits a tad high in center on the Carrera COT and will need slight sanding, after you finish the first set you can sand down the hub a little to extend wear)

22x10x4mm fits Scalextric USA Classics, Monogram Corvette Grand Sport

20x12x5mm fits Slot.it Large Hub…. 5mm rib fits all 18mm hubs Carrera C6R, 575, 935/78, SCX GT's, Ninco 911's

22x10x5mm fits Slot.it Large and Medium Hubs…5 mm rib Sauber, Porsche, Lancia in-line configurations, some sanding needed to achieve diameter, but well worth it. also fits MRRC Cobras, Carrera Spinners & LMP, etc. etc.)

20.5x10.5x5mm fits Slot.it Ferrari 312 PB and Alfa 33/3 sidewinders, also fits many other hubs with 5mm raised hub rib... SCX Rally, MRRC Cobra,  

20x12x6mm (3mm sidewall) fits Slot.it F1………………6mm rib (this baby fits practically everything)

20x12x6mm (2mm sidewall)  FLY#1   fits Fly Classics, GT/DTM fits Ninco Moslers,  Scalex MC12, and many more hubs with 6mm raised rib on hub.

21x14x6mm (2.5mm sidewall)  FLY#2  fits Fly Classics, GT/DTM fits Ninco Moslers,  Scalex MC12, and many more hubs with 6mm raised rib on hub.

22x12x6mm (3mm sidewall)  FLY#3  fits Fly Classics, GT/DTM fits Ninco Moslers,  Scalex MC12, and many more hubs with 6mm raised rib on hub.

22x10x6mm (3mm sidewall) FLY #4 fits Fly Ferrari 250GTO (O.E.M. size) GT40, F512

20x12x7mm fits Ninco F1 and Monogram L88 Corvette

20x12x8mm fits SCX F1

Fly March 761, Scalextric F1 Classics,

Once installed all you need to do is sand the tire lightly to true it up and remove any convex or concave centers and away you go……… I also suggest that you paint the front tire treads with clear nail hardner polish. If you wish to glue the tire on, use the same clear nail polish, just clean the tire with acetone, lightly sand the bead on the hub, paint a generous layer on the inside bead of the hub, paint the outside bead of the tire, and mount the tire, allow one hour to dry, sand them true, and away you go!

Car brands that my tires fit include such notables as Scalextric, Carrera, Fly, Slot.it, Spirit, Sloter, Vanquish MG, MRRC, SCX, Ninco,

Tire Size Selection… 1/24 Scale

Choosing a tire for your 1/24 scale RTR is much easier because there are fewer models available and thusly will be listed and described at auction. Occasionally I will find a tire that has cross-applications and will offer when produced. I currently make tires for AUTOart, Carrera, BRM, TSRF,